Niles A4.6Ci Installation & Operation Manual page 59

PROGRAMMING OVERVIEW
Worksheet #5, Zone On/Off and System On/Off Sequence Programming
Worksheet #5 documents the steps of the sequences that occur whenever a zone first turns on and when the
zone turns off. Identify where the IR commands were programmed by using their page and key address. Copy
the worksheet as needed to document zone sequences for the Master A4.6Ci and all the Slaves in your system.
It also documents the steps of the sequences that occur whenever the system turns on and when it turns off. The
System On/Off Sequence is controlled by the Master A4.6Ci only.
1
JOB TITLE
Mr. Smith
Document the customer's name.
MASTER
3
(CHOOSE ONE)
3
B
ZONE ON SEQUENCE
STEP
DESCRIPTION
1
2
3
4
5
The steps in the Zone On and Zone Off sequences:
• Describe the IR commands, or indicate if there are delays.
• Page and key address where the IR commands are stored.
x
4 MASTER
(THE SYSTEM ON/OFF SEQUENCE IS PROGRAMMABLE FOR THE MASTER A4.6CI ONLY)
SYSTEM ON SEQUENCE
STEP DESCRIPTION
1
2
3
4
5
The steps in the System On and System Off sequences:
• Describe the IR commands, or indicate if there are delays.
• Page and key address where the IR commands are stored.
SLAVE 1 SLAVE 2
3
A
• Check a box to indicate if it is the Master or Slaves 1-3.
• Zone number
ZONE OFF SEQUENCE
KEY STEP
PAGE
1
2
3
4
5
SYSTEM OFF SEQUENCE
KEY
PAGE STEP
1
2
3
4
5
2
SYSTEM DESIGNER
John Doe
Document the system designer's name.
SLAVE 3 ZONE #
DESCRIPTION
DESCRIPTION
59
KEY
PAGE
KEY
PAGE