Niles A4.6Ci Installation & Operation Manual page 80

PROGRAMMING STEPS
Step 3 - Press the Master Key that identifies the Master Key page where the IR command is stored for the first step in the
Zone On/Off or System On/Off sequence you are programming.
or
Tap the OFF Key if the IR com-
mand is stored in a Function Key
within the Default Page. Master
Keys 1 and 3 illuminate.
or
Press and hold the OFF Key if the
IR command is stored in a
Function Key within the Library
Page. Master Keys 1, 3, and 4 illu-
minate, simulating an "L. "
Step 4 - Press the Function Key where the IR command is stored.
Select ™ Transport ™ Numeric
The PAGE LED turns OFF, and the KEY LED blinks RED.
Select ™ Transport ™ Numeric
The KEY LED turns OFF, and the PAGE LED blinks RED.
80
™
™