Engineering Mode - Calibration Tab - Matrix A7X-04 Service Manual

6.2 ENGINEERING MODE - CALIBRATION TAB

ENGINEERING MODE
End Points
6.3 ENGINEERING MODE - ERRORS TAB
ENGINEERING MODE
Errors
18
CHAPTER 6: ENGINEERING MODE
FUNCTION & DEFAULTS
Auto Calibration
Tune Incline 1 Top: Top: 2.0
Tune Incline 1 Bottom: Bottom: 2.0
Tune Incline 2 Top: Top: 2.0
Tune Incline 2 Bottom: Bottom: 2.0
FUNCTION & DEFAULTS
DESCRIPTIONS
This option calibrates the elevation parameters.
Sets the maximum incline for incline motor 1.
Sets the minimum incline for incline motor 1.
Sets the maximum incline for incline motor 2.
Set the minimum incline for incline motor 2.
DESCRIPTIONS
This option displays the error code
history.
MODIFIED
N/A
Top: 0.1 - 25.5
Bottom: 0.1 - 25.5
Top: 0.1 - 25.5
Bottom: 0.1 - 25.5
MODIFIED
N/A