General Instructions; Standby Mode; Signal Strength - Siemens SXG75 User Manual

of SXG75, FUG us-en, A31008-H8900-A1-1-7619 (07.10.2005, 13:11)
right page (21)

General instructions

Standby mode

The phone is in standby mode and is
ready for use when the name of the
service provider appears on the dis-
play.
B
The following information might be
displayed:
Logo
If logo or wallpaper is enabled
(page 115) logo is displayed.
CB messages
If CB display is enabled (page 77) a
CB ticker with the latest CB message
is displayed, scrolling horizontally if
needed. The CB ticker is only availa-
ble if the alert region is not used, i.e.
there are no current events.
Press and hold the On/Off/
End key to return to
standby mode from any
situation.
General instructions
Alert region
In the alert region above the softkeys
the following message types can be
displayed:
• New entries in missed calls list,
voice mail or inbox.
• New content via IrDA/Bluetooth.
• Missed calendar events.
The number of new entries is
displayed (e.g. 1 Missed call).

Signal strength

Z
Strong signal.
[
A weak signal reduces the
call quality and may lead
to loss of the connection.
Change your location.
If phone cannot obtain network serv-
ice after 15 minutes the power save
mode is used. The phone only
attempts to acquire service in
intervals.
21