Related Manuals for Quanmax KPC-2150 Series
Summary of Contents for Quanmax KPC-2150 Series
- Page 1 KPC-2150 Series 21.5” Fanless Panel PC ® ® with Intel Celeron J1900 Processors User’s Guide KPC-2150 Series User’s Manual...
- Page 2 © 2015 Quanmax Inc. All rights reserved. The information in this user’s guide is provided for reference only. Quanmax does not assume any liability arising out of the application or use of the information or products described herein. This user’s guide may contain or reference information and products protected by copyrights or patents and does not convey any license under the patent rights of Quanmax, nor the rights of others.
-
Page 3: Table Of Contents
Panel Mounting..................24 Chapter 3 AMI BIOS Setup ..................26 Overview ....................26 Main Menu....................27 Advanced Menu..................28 Security Menu.................... 37 Boot Menu ....................38 Save & Exit Menu ..................39 Chapter 4 Driver Installation .................. 40 KPC-2150 Series User’s Manual... -
Page 4: Figures
Figure 6 COM port ..................21 Figure 7 Turning on the system ..............22 Figure 8 VESA Mounting Hole Locations ........... 23 Figure 9 Panel Mount Cut-out hole and maximum panel thickness ... 24 Figure 10 Panel Mounting ................25 KPC-2150 Series User’s Manual... -
Page 5: Tables
Table 10 Advanced Menu –USB Configuration .......... 34 Table 11 Advanced Menu – H/W Monitor ........... 35 Table 12 Power Menu ................36 Table 13 Security Menu ................37 Table 14 Boot Menu ................... 38 Table 15 Save & Exit Menu ................ 39 KPC-2150 Series User’s Manual... -
Page 6: Safety Instructions
Use extreme caution when installing or removing components. Refer to the installation instructions in this user’s guide for precautions and procedures. If you have any questions, please contact Quanmax Post-Sales Technical Support. WARNING High voltages are present inside the chassis when the unit’s power cord is... -
Page 7: Preventing Electrostatic Discharge
Static electricity can harm system boards. Perform service at an ESD workstation and follow proper ESD procedure to reduce the risk of damage to components. Quanmax strongly encourages you to follow proper ESD procedure, which can include wrist straps and smocks, when servicing equipment. - Page 8 Handle components and boards with care. Don’t touch the components or contacts on a board. Hold a board by its edges or by its metal mounting bracket. Do not handle or store system boards near strong electrostatic, electromagnetic, magnetic, or radioactive fields. KPC-2150 Series User’s Manual...
-
Page 9: Preface
Remove all items from the box. If any items listed on the purchase order are missing, notify Quanmax customer service immediately. Inspect the product for damage. If there is damage, notify Quanmax customer service immediately. Refer to “Warranty Policy” for the return procedure. -
Page 10: Warranty Policy
Quanmax or its authorized agent; or if the failure is caused by accident, acts of God, or other causes beyond the control of Quanmax or the manufacturer. Neglect, misuse, and abuse shall include any installation, operation, or maintenance of the product other than in accordance with the user’s guide. -
Page 11: Maintaining Your Computer
Quanmax. Limitation of Liability In no event shall Quanmax be liable for any defect in hardware, software, loss, or inadequacy of data of any kind, or for any direct, indirect, incidental, or consequential damages in connection with or arising out of the performance or use of any product furnished hereunder. -
Page 12: Power Protection
Line conditioners keep a system’s AC power source voltage at a fairly constant level and, therefore, can handle brownouts. Because of this added protection, line conditioners cost more than surge protectors. However, line conditioners cannot protect against a complete loss of power. KPC-2150 Series User’s Manual... - Page 13 Surge protectors should be used with all UPS systems, and the UPS system should be Underwriters Laboratories (UL) safety approved. KPC-2150 Series User’s Manual...
-
Page 14: Chapter 1 Introduction
21.1” LCD Display with 1920 x 1080 resolution Intel® Celeron® J1900 Processor Intel® HD Graphics IP65 approved front bezel 2x GbE, 2x COMs, 4x USB 2.0, 1x USB 3.0, 1x Mini-PCIe slot HDMI, VGA, HD Audio Optional Wireless LAN Fanless design KPC-2150 Series User’s Manual... -
Page 15: Product Specifications
Windows 7, Windows 8, Linux Dimensions 542.6 x 339.2 x 64.5 mm (WxDxH) Environment Operating Temperature: 0°C ~ 50°C Storage Temperature: -20°C ~ 60°C Humidity: 10% ~ 80%, non-condensing Certification CE, FCC Class A Table 1 KPC-2150 product specifications KPC-2150 Series User’s Manual... -
Page 16: System Tour
2. Connect the other end of the AC power cord to a corresponding outlet. HDMI HDMI connector for display output D-Sub 9 pin connector for RS-232/422/485 connection D-Sub 15 pin VGA connector for display output KPC-2150 Series User’s Manual... - Page 17 MIC-IN (Pink) The microphone jack is designed to connect the microphone used for video conferencing, voice narrations, or simple audio recordings. Line-IN (Blue) The Line-in jack is designed to take input from a higher-powered sound source. KPC-2150 Series User’s Manual...
-
Page 18: Mechanical Dimensions
Chapter 1 Mechanical Dimensions 542.6 x 339.2 x 64.5 mm ( W x D x H ) Figure 2 Mechanical Dimensions KPC-2150 Series User’s Manual... -
Page 19: Chapter 2 Getting Started
Chapter 2 Chapter 2 Getting Started Setting up your PC Connecting the monitor Connect the HDMI / VGA cable from your display to the HDMI / VGA port. HDMI Figure 3 VGA / HDMI KPC-2150 Series User’s Manual... -
Page 20: Figure 4 Connect Usb Mouse & Keyboard
Check the manufacturer’s website for the latest software drivers. Connecting to a network device Connect one end of a network cable to the LAN port on the system rear panel and the other end to a hub or switch. Figure 5 RJ45 connector KPC-2150 Series User’s Manual... -
Page 21: Figure 6 Com Port
Chapter 2 COM ports COM ports with the pin definitions. COM1~COM2 RS-232 / 422 / 485 Port DB-9 Half Duplex Full Duplex RS-232 RS-422 RS-485 RS-485 DATA- DATA+ Figure 6 COM port KPC-2150 Series User’s Manual... -
Page 22: Figure 7 Turning On The System
2. Connect the other end of the AC power cord to a corresponding outlet. 3. Press the power switch on the front panel to turn on the system. Power Switch AC Power Inlet Figure 7 Turning on the system KPC-2150 Series User’s Manual... -
Page 23: Vesa Mounting
Use 4 screws with the appropriate length for your mounting bracket. Figure 8 VESA Mounting Hole Locations NOTE To fasten the metal shelf, your monitor must comply with VESA75 or VESA100 standard. The VESA mounting kit is optional. KPC-2150 Series User’s Manual... -
Page 24: Panel Mounting
The Panel PC can be panel mounted and comes with brackets and screws for this purpose. The required cutout for panel mounting and maximum panel thickness is shown below. Figure 9 Panel Mount Cut-out hole and maximum panel thickness KPC-2150 Series User’s Manual... -
Page 25: Figure 10 Panel Mounting
Insert a Panel Mount Secure Chassis to Panel Opening Covers from Bracket into each by tightening the screws with Phillips Screwdriver Bracket Opening (4 on top edge, 2 on bottom edge, 3 on each side) Figure 10 Panel Mounting KPC-2150 Series User’s Manual... -
Page 26: Chapter 3 Ami Bios Setup
This chapter provides a description of the AMI BIOS. The BIOS setup menus and available selections may vary from those of your product. For specific information on the BIOS for your product, please contact Quanmax. NOTE: The BIOS menus and selections for your product may vary from those in this chapter. -
Page 27: Main Menu
F2: Previous Values Total Size 4096 MB (DDR3L) F3: Optimized Defaults Frequency 1333 MHz F4 Save & Exit System date [Mon 05/26/2014] ESC Exit System time [13:23:12] Access Level Administrator Version 2.16.1242. Copyright (C) 2013, American Megatrends, Inc. KPC-2150 Series User’s Manual... -
Page 28: Advanced Menu
Version 2.16.1242. Copyright (C) 2013, American Megatrends, Inc. Onboard LAN 1 Controller Options: Disabled, Enabled Onboard LAN 1 Boot Options: Disabled, Enabled Onboard LAN 2 Controller Options: Disabled, Enabled Onboard LAN 2 Boot Options: Disabled, Enabled Audio Controller Options: Disabled, Enabled KPC-2150 Series User’s Manual... -
Page 29: Table 4 Advanced Menu - Display Configuration
Options: VBIOS Default, CRT, HDMI, LVDS Active LVDS Options: Enabled LVDS Panel Type Options: 1920x1080 24Bit 2CH LVDS Backlight Control Mode Options: Valtage LVDS Backlight Control -Voltage Options: 0.0V, 0.5V, 1.0V, 1.5V, 2.0V, 2.5V, 3.0V, 3.5V, 4.0V, 4.5V, 5.0V KPC-2150 Series User’s Manual... -
Page 30: Table 5 Advanced Menu - Super Io Configuration
IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; Serial Port 1 Type Options: RS232, RS422, RS485 RS485 Duplux Mode Options: Half Duplex, Full Duplex KPC-2150 Series User’s Manual... -
Page 31: Table 7 Advanced Menu - Super Io Configuration - Serial Port
IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12 Serial Port 2 Type Options: RS232, RS422, RS485 RS485 Duplex Mode Options: Full Duplex, Half Duplex KPC-2150 Series User’s Manual... -
Page 32: Table 8 Advanced Menu -Cpu Chipset Configuration
ESC Exit Version 2.16.1242. Copyright (C) 2013, American Megatrends, Inc. EIST Options: Disabled, Enabled Turbo Mode Options: Disabled, Enabled Limit CPUID Maximum Options: Disabled, Enabled Execute Disable Bit Options: Disabled, Enabled Intel Virtualization Technology Options: Disabled, Enabled KPC-2150 Series User’s Manual... -
Page 33: Table 9 Advanced Menu -Sata Configuration
Version 2.16.1242. Copyright (C) 2013, American Megatrends, Inc. SATA Options: Enabled, Disabled SATA Mode Options: IDE Mode, AHCI Mode Serial STS Port 1 Port 1 Options: Enabled, Disabled mSATA Port 1 Port 1 Options: Enabled, Disabled KPC-2150 Series User’s Manual... -
Page 34: Table 10 Advanced Menu -Usb Configuration
Legacy USB Support Options: Enabled, Disabled, Auto XHCI Legacy Support Options: Enabled, Disabled XHCI hand-off Options: Enabled, Disabled EHCI hand-off Options: Disabled, Enabled USB Mass Storage Driver Support Options: Disabled, Enabled XHCI Mode Options: Enabled, Smart Auto KPC-2150 Series User’s Manual... -
Page 35: Table 11 Advanced Menu - H/W Monitor
: +0.869 V ESC Exit +VIN : +12.164 V : +5.066 V +VMEN : +1.349 V Version 2.16.1242. Copyright (C) 2013, American Megatrends, Inc. CPU Warning Temperature Options: Disabled, 80 C, 85 C, 90 C, 95 C KPC-2150 Series User’s Manual... -
Page 36: Table 12 Power Menu
Power Saving Mode Options: Disabled, EUP Enabled Resume By PCIE Device Options: Disabled, Enabled Resume By Ring Device Options: Disabled, Enabled Resume By RTC Alarm Options: Disabled, Enabled Watchdog Timer Configuration WDT Function [Disabled] Options: Disabled, Enabled KPC-2150 Series User’s Manual... -
Page 37: Security Menu
Minimum Length 3 Maximum length 20 Enter: Select +- Change Opt. Administrator Password F1: General Help User Password F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit Version 2.16.1242. Copyright (C) 2013, American Megatrends, Inc. KPC-2150 Series User’s Manual... -
Page 38: Boot Menu
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc. Full Screen LOGO Display Options: Disabled, Enabled Bootup NumLock State Options: On, Off Keyboard Detect Warning Options: Enabled, Disabled CSM Support Options: Enabled, Disabled Boot Option Filter Options: UEFI and Legacy, Legacy only, UEFI only KPC-2150 Series User’s Manual... -
Page 39: Save & Exit Menu
Load Optimal Default values for all the setup values. This option allows you to load failsafe default values for each of the parameters on the Setup menus, which will provide the most stable performance settings. The F8 key can be used for this operation. KPC-2150 Series User’s Manual... -
Page 40: Chapter 4 Driver Installation
You can download the drivers for the KPC-2150 from our website and install as instructed there. For other operating systems, please contact us. KPC-2150 Series User’s Manual...
Need help?
Do you have a question about the KPC-2150 Series and is the answer not in the manual?
Questions and answers