Wheel, Leg & Lifting Handle Assembly (Premier 170); Leg Assembly (Premier 80) - L.B. White TS080 Owner's Manual

See Fig. 4 for assembly of components. Ensure all
hardware is tightened securely.
FIG. 4
1 BOLT 5/16-18 X 1"
AND 1 WASHER 5/16"
AT EACH END
NUTS 5/16-18
(2 PER SIDE)
Assemble the legs to the heater as shown. Tighten all
hardware securely.
HANDLE - U
WITH 8 1/2" LEGS
AND AXLE HOLE
SPACER
HUB CAP (PRESS ON)
WHEEL, LEG & LIFTING HANDLE ASSEMBLY
REMOVE CASE SCREW AT EACH
END OF HEATER (BOTH SIDES)
BEFORE INSTALLING U-HANDLES.
WASHER 5/16 (QUANTITY 8)
BOLTS 5/16-18 X 1"
(QUANTITY 10)
COTTER
PIN
FIG. 5
Premier 170
HANDLE - U, WITH 8" LEGS
INSTALL CAGE NUTS AS SHOWN
BEFORE BOLTING
SUPPORT TO HEATER
LEG ASSEMBLY
Premier 80
BOLTS 5/16-18 X 1"
(QUANTITY 8)
INSTALL CAGE NUTS AS SHOWN
BEFORE BOLTING
SUPPORT TO HEATER
10