Using Multiple Projectors; Multiple Projector Adjustment Overview - Epson Pro L30000UNL User Manual

• To see the last time the projector performed a calibration, select Last Run.
Note: If you use the projector continuously for more than 24 hours or use direct shutdown regularly,
select Schedule Settings to schedule calibration of the light source periodically.
5. When you are finished, select Return and press the Enter button to return to the Reset menu.
Parent topic:
Related tasks
Turning On the Projector
Turning Off the Projector
Stopping Video Action Temporarily

Using Multiple Projectors

You can combine the projected images from two or more projectors to create one large image. Follow
the instructions in these sections to set up and project from multiple projectors.

Multiple Projector Adjustment Overview

Projector Identification System for Multiple Projector Control
Tiling Images into One Image
Blending the Image Edges
Adjusting the Black Level
Matching Tint and Brightness (Screen Matching)
Scaling an Image
Tiling Images Using Geometry Correction Assist
Stacking Images Using Geometry Correction Assist
Parent topic:
Multiple Projector Adjustment Overview
If you are combining images from multiple projectors on a network (up to 15), you can assign one
projector as the "master" and automatically adjust all the images to match the "master" image. If the
projectors are not connected to a network, you can match each projector's images manually.
You can automatically correct distortion and overlapping areas in multiple projected images by using the
tiling assist function and automatically correct stacked images using the stacking assist function in the
Epson Projector Professional Tool.
Using Advanced Image Adjustment Features
Adjusting Projector Features
194