KTM 2014 690 SMC R EU Repair Manual page 65

11 FUEL TANK, SEAT, TRIM
3 0 0 3
2 0 0 2
Condition
The fuel tank is completely full.
Ensure that the battery voltage does not drop below 12.5 V.
The ignition is on.
The diagnostics tool is connected.
–
Press on the metal plate and disconnect the fuel hose connection
Info
Remaining fuel may run out of the fuel hose.
302037-10
–
Mount special tool
Pressure testing tool (61029094000) (
–
Mount special tool
Testing hose (61029093000) (
–
Insert the hose end in a fuel canister.
Guideline
Minimum fuel canister capacity
400926-10
–
Perform the "Actuator Test" > "Function test of fuel pump control".
Guideline
Maximum duration of actuator test
–
Check the fuel pressure with the filler cap closed.
Fuel pressure
When the fuel pump is active
» If the specification is not reached:
–
Open the filler cap. (
–
Check the fuel tank breather.
400927-01
–
Check the fuel pressure with the filler cap open.
Fuel pressure
When the fuel pump is active
» If the specification is not reached:
–
Check that the fuel line is clear.
–
Change the fuel filter. (
–
Change the fuel pump. (
–
Stop the "Function test of fuel pump control" actuator test by pressing the "Quit" but-
400928-01
ton.
–
Dismantle the special tools.
–
Connect the fuel hose connection.

.
p. 232)

with nozzle code 0,60.
p. 231)
10 l (2.6 US gal)
3 min
3.3... 3.7 bar (48... 54 psi)
p. 61)
3.3... 3.7 bar (48... 54 psi)
p. 64)
p. 67)
63

.