AM SERIES CONTENTS ELECTRONIC WEIGHING SCALE 1. INSTALLATION OPERATION MANUAL 2. SPECIFICATIONS 3. KEYBOARD LAYOUT AND DESCRIPTION PLEASE READ THIS MANUAL VERY CAREFULLY BEFORE 4. INITIAL SETUP ATTEMPT TO OPERATE THE SCALE 5. INSTRUCTION FOR USE 6. TROUBLE SHOOTING 7. DAILY CARE AND MAINTENANCE DECEMBER 1999 Specifications subject to change without prior notice...
1. INSTALLATION b. Before first time use, plug the main adaptor into the wall outlet and charge 1.1 Check and make sure that the following the scale for at least 8 hours. accessories are included: This operation manual c. Retain the packing materials for future Scale x 1 transportation purposes.
4. INITIAL SETUP 5. IN-CHARGE INDICATOR Red color: Recharging battery 4.1 Placing the Scale Green color: Charging completed In order to obtain an accurate weighing result, the scale must be placed on a strong 6. ZERO INDICATOR and level surface. An arrow will appear and point at this sign to indicate a zero weight status.
Page 5
d. Press TARE twice Follow the below steps to enable/disable e. Scale displays F.3 Auto Power Off Function f. Press and hold MODE until the kg or lb sign appears. a. Turn scale off g. Press MODE to shift between kg and lb b.
5. INSTRUCTION FOR USE 5.3 Select Weight Unit Press MODE to shift among kg à decimal à lb/oz. à kg weight units. Refer to 4.2.1 for internal 5.1 Before Weighing Make sure that: setting procedures. a. The platter is inserted firmly into the scale The weight unit used before power off would b.
Page 7
5.6 Tare off the Weight of a Container 5.7 Clear the TARE Function When a container is used, follow the below steps Remove all loads from platter then press TARE. to tare off the weight of the container and After TARE is pressed, the TARE INDICATOR would get the net weight.
6. TROUBLE SHOOTING Syndrome Rated capacity cannot be reached Check Is the TARE INDICATOR on? Syndrome Scale cannot be turned on Action: Turn the scale off. Remove all loads Check: Is the scale charged? from platter and turn on again. Action: Recharge the scale for at least 8 Check...
7. DAILY CARE AND MAINTENANCE Syndrome Weighing result is not accurate Check Is the scale placed in a level condition? Clean the scale with a soft and damp cloth. Action Adjust the adjustable feet to a level If necessary, apply a mild detergent. condition.
Need help?
Do you have a question about the AM-3000 and is the answer not in the manual?
Questions and answers