Headlight Adjustment - PIAGGIO BEVERLY Cruiser 250ie Service Station Manual

Maintenance
VALUE, IT WILL LEAD TO INEFFICIENT BRAK-
ING; FOR THIS REASON, NEVER USE BRAK-
ING FLUID FROM CONTAINERS THAT HAVE
ALREADY BEEN OPENED, OR PARTIALLY
USED.
Recommended products
AGIP BRAKE 4 Brake fluid
FMVSS DOT4 Synthetic fluid
Given normal climatic conditions, change fluid as indicated in the scheduled maintenance table.
N.B.
SEE THE BRAKING SYSTEM CHAPTER WITH REGARD TO THE CHANGING OF BRAKE FLUID
AND THE BLEEDING OF AIR FROM THE CIRCUITS.

Headlight adjustment

- Place the scooter in use conditions, with tyres
inflated to the prescribed pressure on flat ground
at 10 m from a white screen placed in dim light.
- Make sure that the scooter's axle is perpendicular
to the screen.
- Turn the headlight on and check that the limit of
the light beam projected onto the screen does not
exceed 9/10 of the headlight centre height from the
ground and that it is not less than 7/10.
Light beam vertical adjustment
Loosen the screw «A» and rotate the light until the
optimal direction is obtained.
N.B.
THE ABOVE PROCEDURE COMPLIES WITH
THE EUROPEAN STANDARDS REGARDING
MAXIMUM AND MINIMUM HEIGHT OF LIGHT
BEAMS. REFER TO THE STATUTORY REGU-
LATIONS IN FORCE IN EVERY COUNTRY
WHERE THE vehicle IS USED.
MAIN - 14
BEVERLY Cruiser 250ie