Oil Pump - PIAGGIO BEVERLY Cruiser 250ie Service Station Manual

BEVERLY Cruiser 250ie
- Orientate the oil guard by inserting the bracket
which is part of the appropriate tool
- Tighten the threaded bar onto the crankshaft as
far as it will go.
- Use the nut to move the base of the tool until you
can see end of the oil guard driving stroke
- Remove all of the tool components following the
inverse procedure
CAUTION
DO NOT LUBRICATE THE SURFACE FOR KEY-
ING ONTO THE ENGINE CRANKCASE.
CAUTION
ORIENT THE OIL GUARD BY POSITIONING
THE CHAIN HOUSING CHANNEL FACING
DOWNWARDS. WHEN THE POSITION IS
REACHED, DO NOT RETRACT THE OIL
GUARD. FAILURE TO COMPLY WITH THIS
RULE CAN CAUSE A WRONG POSITIONING
OF THE OIL GUARD SHEATH.
CAUTION
FAILURE TO COMPLY WITH THIS ASSEMBLY
PROCEDURE CAN SERIOUSLY DAMAGE THE
ENGINE DUE TO THE WRONG TENSIONING
OF THE OIL PUMP CONTROL CHAIN.
Specific tooling
020622Y Transmission-side oil guard punch

Oil pump

Engine
ENG - 61