Checking The Ignition Timing; Cooling System - PIAGGIO BEVERLY Cruiser 250ie Service Station Manual

BEVERLY Cruiser 250ie
Oil pressure warning light
Warning light (low oil pressure)
The vehicle is equipped with a warning light on the
instrument panel that lights up when the key is
turned to the "ON" position. However, this light
should switch off once the engine has been star-
ted.
If the light comes on during braking, at idling
speed or while turning, it is necessary to first
switch off the engine and then to check the oil
level and the lubrication system

Checking the ignition timing

-Remove the plastic cap on the flywheel cover
-Turn the flywheel until the reference mark «T» on
the rotor matches the reference mark on the fly-
wheel cover as shown in the figure (TDC). Make
sure that the 4V reference point on the camshaft
control pulley is aligned with the reference point on
the head as shown in the second figure. If the ref-
erence is opposite the indicator on the head, turn
the crankshaft once more.
For the use of this reference mark, remove the
spark plug and turn the engine in the direction that
is the reverse of the normal direction using a cal-
liper spanner applied to the camshaft command
pulley casing.

Cooling system

Level check
- To check the level, it is necessary to look inside the expansion tank: a mark on the side of the filler
indicates MIN and MAX levels.
Maintenance
MAIN - 11