Headlight Adjustment - PIAGGIO Beverly 125 Service Station Manual

Hide thumbs Also See for Beverly 125:
Table of Contents

Advertisement

Beverly 125
EXCEEDS A CERTAIN VALUE, BRAKING WILL BE INEF-
FICIENT.
NEVER USE BRAKE LIQUID IN OPEN OR PARTIALLY
USED CONTAINERS.
UNDER NORMAL CLIMATIC CONDITIONS, THE FLUID
MUST BE CHANGED EVERY 20,000 KM OR ANYWAY EV-
ERY TWO YEARS.
Recommended products
AGIP BRAKE 4 Brake fluid
FMVSS DOT 4 Synthetic fluid

Headlight adjustment

Proceed as follows:
1. Position the unloaded scooter, in running order
and with the tyres inflated to the prescribed pres-
sure, onto a flat surface 10 m away from a half-lit
white screen; ensure the axis of the scooter is per-
pendicular to the screen;
2. Turn on the headlight and check that the limit of
the projected light beam is not over 9/10 or below
7/10 of the distance from the ground to the centre
of the headlight;
3. If this is not the case, regulate the headlight by
turning screw "A".
N.B.
THE ABOVE PROCEDURE COMPLIES WITH THE EURO-
PEAN STANDARDS REGARDING MAXIMUM AND MINI-
MUM HEIGHT OF LIGHT BEAMS. REFER TO THE STATU-
TORY REGULATIONS IN FORCE IN EVERY COUNTRY
WHERE THE vehicle IS USED.
SAS filters inspection and cleaning
- Remove the flywheel cover.
- Remove the two screws fixing the SAS valve as
shown in the figure and remove the SAS valve and
the O-ring from the support
Maintenance
MAIN - 49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents