Telco Box Installation - Motorola AP-6511 Installation Manual

Installation Guide

2.6 Telco Box Installation

For Telco Box installations, the AP-6511 is installed directly over the standard wall plate supplying Ethernet. All
cabled electrical connections are mode within a recessed well in the housing of the AP-6511 Access Point.
To install the AP-6511 Access Point over a Telco box:
1. Remove the cover of the CAT5 wall plate.
NOTE
2. Snap out keystone connectors from existing plate.
3. Gently pull some cable out of the wall so it can be used with the AP-6511 Access Point.
4. Attach the metal mounting plate (shipped with the AP-6511) to an existing standard Telco in-wall box.
The example above assumes the Telco Box has a 1 RJ11 phonejack and
1 RJ-45 10/100 Ethernet connection.
13