NEC MultiSync FP1370 Service Manual page 8

Tools 2
Language: OSM control menus are available in seven languages.
OSM Position: You can choose where you would like the OSM controls menu to appear on your
screen. Selecting OSM Position allows you to manually adjust the OSM controls menu left, right, up or
down.
OSM Turn Off: The OSM controls menu will stay on as long as it is in use. In the OSM Turn Off sub-
menu, you can select how long the monitor waits after the last touch of a button for the OSM controls
menu to disappear. The preset choices are 10, 20, 30, 60 and 120 seconds.
OSM Lock Out: This control completely locks out access to all OSM controls functions except
Brightness and Contrast. When attempting to activate OSM controls while in the lock out mode, a
screen will appear indicating that OSM controls are locked out. To activate the OSM Lock Out function,
press PROCEED, then press ▲ ▲ ▲ ▲ and hold down simultaneously. To deactivate the OSM Lock Out,
press PROCEED, then press ▲ ▲ ▲ ▲ and hold down simultaneously.
IPM™ System Off Mode: Enable: The IPM System works normally and all stages of energy savings
are utilized.
Disable: The Off Mode of the IPM System is not used.
NOTE: For standard systems and graphics boards, keep the factory setting at ENABLE.
TM
EdgeLock Control: Operating your monitor at a non-standard timing may cause images to appear
darker than normal or have color distortion. Use of the EdgeLock control will adjust images to their
normal state.
Refresh Notifier: A message will advise you if the refresh rate of the signal being applied to the
monitor by the computer is too low. For further information, please refer to your display card or system
manual.
Information
Display Mode: Indicates the current mode and frequency setting of the monitor.
Fitness Tips: The fitness Tips provide you with helpful reminders to periodically rest your eyes. You
may select how frequently the remainders are displayed based upon your individual needs. Select an
interval from 15,30,45,60,90 or 120 minutes for the tips to appear. When the tips appear, follow the
advice of the tips and press EXIT to clear.
Monitor Info: Indicates the model and serial numbers of your monitor.
2-3