NEC MultiSync FP1370 Service Manual page 34

7-5. Displaying the OSM.
7-5-1 FACTORY MODE: OFF
MENU(U)：Press "EXIT" or "+" , "-" , " ! " , " " " , "PROCEED" once .
MENU(S)：Open MENU, TAG7 "INFORMATION" - "DISPLAY MODE", and press "RESET" and
" ! " , " " " switch at once.
A warning message will be displayed, then press "PROCEED" switch.
7-5-2 FACTORY MODE: ON
MENU(U)：Press "+" , "-" or " ! "," " " switch.
MENU(S)：Press "PROCEED" switch once.
7-5-3 Self Test
When FACTORY MODE is ON, Self test is on by no signal.
When FACTORY MODE is OFF, Self test in on by power on with pushing "RESET" switch.
7-6. How to turn off OSM MENU
* To close the Menu
Press "EXIT" switch while MENU (U) or MENU (S) is displayed
TAG is highlighted
ITEM is highlighted
Entering SUB MENU
* To close MENU temporarily.
Press "PROCEED" once, while MENU (S) is being displayed.
Press "PROCEED" once more, MENU (S) is displayed again.
： 1 time.
： 2 times.
： 3 times
5-5