NEC MultiSync FP1370 Service Manual page 10

ASSEMBLY
・Before you disassemble the set, turn off power and pull out the power plug.
・Use the appropriate screwdrivers that fits the screws. If you use screwdriver that does not fit, you may
break the screws.
・Disassembly is the opposite process of assembly.
・ Carefully discharge the CRT anode potential by grounding to coating dag before removing Anode Cap.
REMARK
Clamp the EMF COIL with
CLAMPER. (4 point)
The thick of the EMF COIL is
placed between A and B .
REMARK
Forming(Corner Coil)
SYMBOL
132
SYMBOL
133
4-1