Seagull Models VAN'S RV- 8 Instruction Manual page 21

WWW.SEAGULLMODELS.COM
INSTALLING THE MAIN LANDING
M2 lock nut. GEAR TO FUSELAGE.
8mm
Metal clevis.
Snap keeper.
Servo arm.
Snap keeper.
1) The blind nuts for securing the land-
Nylon Snap keeper.
ing gear are already mounted inside the
fuselage.
2) Using the hardware provided, mount
the main landing gear to the fuselage.
Hex Nut.
3) Place the fuselage inverted on the
workbench in a suitable stand. Set the
Fuel tubing.
landing gear in place and use a screw-
drive to secure the landing gear to the fu-
selage using bolts M4x20mm and wash-
INSTALLING THE FLAP PUSHROD.
ers. Make sure to use the threadlock on
the bolts so they don't vibrate loose.
Repeat the procedure for the aileron
pushrod.
M4x20mm
Thread locker glue.
21