AMX D. D.
Choose "AMX D. D." in the Network menu and press SELECT button, select ON or OFF to
allow the projector to be detected by AMX Device Discovery.
For more details, visit http://www.amx.com/.
Network factory default
1. Select "Network factory default" in the Network menu and press SELECT button.
2. A confirmation box appears and select "Yes" and then press SELECT button.
3. Another confirmation box appears and select "Yes" and then press SELECT button.
4. All the wired LAN settings will go back to the factory default settings. For details, refer to
"Wired LAN factory default settings" as shown in the table below.
LHD700 Network User Manual
020-000446-01 Rev.1 (11-2011)
Network factory default
15