Chapter 4 Controlling The Projector; Power Control And Status Check - Christie LX1750 Network Manual

Chapter 4 Controlling the Projector

Power control and status check

Click Power & Status on the main menu. The control page will be dis-
played.
By clicking ON or Standby on the page, the power of the projector can be
controlled.
Warning temperature icon
Item
PJ status
Power ......................... Displays the status of the lamp. (ON, OFF, On starting up, On cooling down,
Status .......................... Displays the status of the projector's power. (Refer to next page.)
Power control ........ Controls the projector power by clicking "ON" or "Standby".
PJ temp.
External temp. A .. Displays the surrounding temperature of the intake vent.
Inside temp. A ...... Displays the temperature inside of the projector.
* The warning icon will appear if the temperature exceeds a specified value. Check if there is no
object to obstruct the airflow around the intake or exhaust vent. It might be airfilter clogged.
Replace the airfilter with new one.
* The temperature unit can be set either Centigrade or Fahrenheit in the item "Initial Setting".
(+p.22)
✐ The projector cannot be turned on while the projector is on cooling down.
✐ The web browser checks and updates the projector's condition every 30 seconds automatically.
32
Description
Service in need)
Confirmation window
as shown in the below
appears when
Standby
is pressed.
Popup confirmation window
LX1750 Network User Manual
020-000639-01 Rev.1 (11-2013)