Multitone FLA 872 Technical Manual page 38

Radio paging receivers
Table of Contents

Advertisement

TLA 852/FLA 872
IC5 monitors the voltage of V
to a level that would cause data corruption.
Transistor TR1, connected to pins 6 and 15 of IC3, detects the battery voltage. If
BAT1 is removed, the drop in B+ causes transistor TR1 to switch OFF which sets the
microprocessor to low-current mode. In this mode BAT2 supplies sufficient power
to keep the microprocessor and the SRAM operational for up to 60 minutes.
The 1 volt supply for the receiver circuits is provided by transistor TR406 and its
associated components. The circuit is a series regulator and is maintained within
specification by a control circuit in IC401.
Page 3 - 10
and resets the decoder circuits if the voltage drops
DD
TM1205 Issue 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FLA 872 and is the answer not in the manual?

Table of Contents