Receiving And Storing Messages; Receiving A Message; Reviewing Stored Messages - Multitone FLA 872 Technical Manual

2.3

RECEIVING AND STORING MESSAGES

2.3.1

Receiving a Message

When the pager receives a new message the first part of the message shows on the
display and the alert operates for eight seconds.
Push any button to acknowledge receipt of the message and to stop the alert.
If the call is not acknowledged the pager will give a short alert every five minutes for
a maximum period of one hour.
To display the message, push the
screen can show, push the
To return to the standby screen, push and hold the
for the unit to time-out. If the message has not been read, the standby screen will
show the 'message' symbol.
2.3.2

Reviewing Stored Messages

To display the received messages, starting with the newest message, push the
-
button. To scroll through the messages, use the
message is longer than the screen can show, push the
part of the message.
When the last part of the message is shown, push the O> button. The display shows
three symbols:
To read the message again, use the
O>
push the
To delete the message, use the
push the O> button. The display shows the delete symbol plus a flashing
Push the O> button again to delete the message.
To put the message in the Archive Store, use the
symbol then push the O> button. The display shows the archive symbol plus a
?
flashing . Push the O> button again to transfer the message to the Archive Store.
To return to the standby screen at any time, push and hold the O> button for one
second or wait for the unit to time-out.
TM1205 Issue 2
O>
button to show the next part of the message.
button.
¬
-
button. If the message is longer than the
O>
button for one second or wait
¬ -
or buttons to select the first symbol then
-
or buttons to select the second symbol then
¬ -
or
TLA 852/FLA 872
¬ -
or buttons. If the
O>
button to show the next
?
symbol.
buttons to select the third
Page 2 - 13