Satellite Radio Operations - Clarion DXZ77SUS8 Owner's Manual

Satellite Radio Operations
This function is available when a Satellite Radio
Receiver is connected through the CeNET
cable.
This unit can control the following satellite radio
receivers:
• XM Satellite Radio Receiver: XMD1 000
• XM Smart Digital Adapter: XM SDA
• SIRIUS Satellite Radio Receiver: SIRCL2,
SIRCL3
Note:
• When the function is differ depending to the
connected receiver, they are distinguished by the
following notations:
'XM": for an XM Satellite Radio Receiver
"SIRIUS": for
a
SIRIUS Satellite Radio Receiver
Selecting a Satellite Radio mode
1. Press the [SRC] button.
The system changes to the specified
Satellite Radio mode.
Selecting a band
1. Press the [MENU] button to select a band.
This changes the reception band as follows:
·XM:XM1-+XM2-+XM3-+XM1 ...
• SIRIUS: SR1 -+ SR2 -+ SR3 -+ SR1 ...
e Information displayed during reception
The following information is displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time
or after a reset "UPDATING"
• When a channel is being tuned in (no signal is
yet received):
XM: "LOADING", SIRIUS: "ACQUIRING"
• A channel without a broadcast has been
selected:
XM: "--- CH", SIRIUS: "INVALID CH"
• A channel not covered by your contract
XM: "UPDATING", SIRIUS: "CALL 888"
~
"539-SIRI" (alternated)
• When your contract is expired: "SUB
UPDATE"
34
DXZ775USB
Confirming your SIRIUS ID
1. Press the [OPTION] button.
2. Push the [SEEK PANEL] leftward or
rightward to select "SID DISP".
3. Press the
[~II
ENT] button.
Your SIRIUS 10 will be displayed 12 digits
number.
4. To return to the previous mode, press the
[OPTION] button.
Displaying channel labels
1. Press the [TITLE] button to select the
desired channel label.
Channel -+ Category -+ Title -+ Artist -+
Radio text -+ Channel. ..
Channel selection
1. Channels are selected with the [SEEK
PANEL].
*
For details, see the following operation
descriptions.
Note:
• The audio output is muted and other button
operations are not accepted during channel
selection.
Tuning mode
There are two channel selection modes: quick
tuning mode and step tuning mode.
e Quick tuning
1. Push the [SEEK PANEL] leftward or
rightward and hold in position for 1 second or
longer.
eStep tuning
1. Push the [SEEK PANEL] leftward or
rightward.