Clarion DXZ77SUS8 Owner's Manual page 33

Operations Common to Each Mode
AUX function
This system has an external input cable so you
can listen to sounds and music from external
devices connected to this unit.
• Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
*
The factory default setting is "MID".
1. Press the [OPTION] button, "AUX SENSE
MID" appears in the display.
2. Push the [P .CH] button upward or downward
to select "LOW", "MID" or "HIGH".
6. Push the [SEEK PANEL] leftward or
rightward to move the cursor.
7. Press the [MENU] button to select a
character type. Each time you press the
[MENU] button, the character type changes
in the following order:
Capital letters
-+
Small letters
-+
Numbers/
Symbols
-+
Umlaut
-+
Capital letters ...
8. Push the [P.CH] button upward or downward
to select the desired character.
9. Repeat steps 6 to 8 to enter up to 10
characters for the title.
10. Press and hold the
[~II
ENT] button for 2
seconds or longer to store the title into
memory.
Mode Number of titles
Radio mode 30 titles
CD mode 50 titles
TV mode 20 titles
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer and
TV stations. The number of titles that can be
entered for each mode are as follows.
1. Press the [SRC] button to select the mode
you want to enter a title (CD, CD changer or
TV).
2. Select and playa CD in the CD changer or
tune in to a TV station for which you want to
enter the title.
3. Press the [OPTION] button.
4. Push the [SEEK PANEL] leftward or
rightward to select "TITLE INPUT".
5. Press the
[~II
ENT] button.
The display switches to the title input display.
CD changer mode
DCZ625 connected
Number of titles
100 titles
Clearing titles
1. Select and playa CD in the CD changer or
tune in to a TV station for which you want to
clear the title.
2. Press the [OPTION] button.
3. Push the [SEEK PANEL] leftward or
rightward to select "TITLE INPUT".
4. Press the
[~II
ENT] button.
The display switches to the title input display.
5. Press and hold the [MENU] button for 1
second or longer.
All characters in the title disappear.
6. Press and hold the
[~II
ENT] button for 2
seconds or longer to store the setting.
DXZ775USB
29