Clarion DXZ77SUS8 Owner's Manual page 32

Operations Common to Each Mode
• Setting the dimmer control
You can set the dimmer control "HIGH" "MID"
"LOW" or "OFF". "
*
The factory default setting is
"MID".
2-1. Select "DIMMER".
3-1. Push the [P.CH] button upward or
downward to select the setting.
"HIGH"
+-+
"MID"
+-+
"LOW"
+-+
"OFF"
• Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
*
The factory default setting is
"OFF".
2-1. Select "BLINK LED".
3-1. Push the [P.CH]. button upward or
downward to select "ON" or "OFF".
• Setting the external amplifier
*
The factory default setting is
"OFF".
2-1. Select "AMP CANCEL".
3-1. Push the [P.CH] button upward or
downward to select "ON" or "OFF".
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
• Setting the car speaker output for the
cellular phone
When the AUX input cable is used to connect a
AUX BLUETOOTH BB (BLT370) (sold
separately) .
*
The factory default setting is "R".
*
To output the telephone calls, set the cellular
phone interrupt to ON.
2-1. Select "TEL-SPEAKER".
3-1. Push the [P.CH] button upward or
downward to select "R" or "L".
• R:
Telephone calls can be heard on the front
right speaker connected to this unit.
• L:
Telephone calls can be heard on the front
left speaker connected to this unit.
• Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
When the AUX input cable is used to connect a
AUX BLUETOOTH BB (BLT370) (sold
separately) .
*
The factory default setting is
"OFF".
2-1. Select "TEL-SWITCH".
3-1. Push the [P.CH] button upward or
downward to select the setting in the
following order:
"OFF"
+-+
"ON"
+-+
"MUTE"
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
*
When listening to your calls on your car
speakers, you can adjust the volume by
pushing the [P.CH] button upward or
downward.
• MUTE:
The sound from this unit is muted during
telephone calls.
Note:
• If connecting
a
hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
• Performing a system check
2-1. Select "SYSTEM CHECK".
3-1. Press and hold the
[~II
ENT] button for 1
second or longer.
"SYSTEM CHECK" appears in the display,
then the unit returns to the speaker system
selecting mode.
28
DXZ775USB