Vitek VT-3466 Manual Instruction page 6

ENGLISH
Use the /
in the selected folder.
Repeated playback of a track or a disc
1. To repeat one track press the REP/RAN but-
ton once, "REP" will appear on the LCD-dis-
play.
2. To repeat all tracks on the disc press the
REP/RAN button twice, "REP ALL" will ap-
pear on the LCD-display
3. To repeat the album press the REP/RAN
button thrice, "REP ALBUM" will appear on
the LCD-display
Note: These functions are active only in the
playback or pause mode.
Random playback
1. To random playback all tracks on the disc,
press the REP/RAN button four times in the
playback mode, "PLAY RANDOM" will appear
on the LCD-display.
2. To cancel random playback of all tracks,
press the REP/RAN button once again,
"PLAY RANDOM" will disappear from the
LCD-display.
Note: These functions are active only in the
playback or pause mode.
PROGRAMMING OF THE PLAYBACK
You can program playback of tracks in the de-
sired order.
In the CD or MP3-disc playback mode:
1. When the playback of a disc is stopped,
press the PROG button once. "PROGRAM",
track number "P01" will appear on the LCD-
display.
2. Select the desired track, consequently press-
ing the
3. To store the selected track press the PROG
button. The number of the track will change
to "Р02".
4. Programming of the next track: select the
next track, consequently pressing the
buttons. Then press the PROG button to
store the selected track in memory.
5. For playback of the programmed tracks, press
the PLAY/PAUSE button.
6. To cancel programmed playback mode press
the STOP button or open the disc slot lid, or
set the FUNCTION switch to another posi-
tion.
Downloaded From Disc-Player.com Vitek Manuals
3466IM.indd 6 3466IM.indd 6
buttons to select the desired track
or buttons.
Note: You can program up to 99 tracks.
Playback of МР3 files from a USB-device
This unit can playback most of MP3 discs but
there are cases when the disc is not played back
due to the settings of the software used for re-
cording this disc. (For instance, if the finalization
of a disc is absent.)
1. Switch on the unit. Set the FUNCTION switch
to the AUX(MP3) position.
2. Press and hold the PLAY/PAUSE button on
the unit to move to the USB mode.
3. Insert a USB device into the corresponding
jack. The reading will start, and then total
number of tracks will appear on the display.
4. If a USB device is not connected to the USB
jack, "NOd" will appear on the LCD-display.
5. To exit the USB mode, press and hold the
PLAY/PAUSE button.
6. To move 10 tracks forward or backward,
press and hold the -10/FOL- and +10/FOL+
buttons (to select album press and hold the
buttons).
7. Use the or
track.
8. Press and hold the
creased speed playback in the forward or
backward direction.
9. Press the PLAY/PAUSE button to playback
the selected track.
10. Press the PLAY/PAUSE button to pause
playback.
11. To resume playback press the PLAY/PAUSE
button once again.
12. To stop playback press the STOP button.
Note: This unit does not support playback
from HDD discs and some MP3 players.
Repeated playback of a track or a folder
(album)
1. To repeat one track press the REP/RAN but-
ton once in the USB mode, the current track
will be constantly repeated.
or 2. To repeat all tracks press the REP/RAN
button twice, all tracks will be constantly re-
peated.
3. To repeat one folder press the REP/RAN
button thrice, all tracks in the folder will be
constantly repeated.
Note: These functions are active only in the
playback or pause mode.
6
buttons to select the desired
/ buttons for in-
17.09.2010 11:04:22 17.09.2010 11:04:22