Zywall/Usg Ipsec Vpn Client Configuration Provisioning - ZyXEL Communications USG40 User Manual

Figure 236 Configuration > VPN > IPSec VPN > Concentrator > Add/Edit
Each field is described in the following table.
Table 148 VPN > IPSec VPN > Concentrator > Add/Edit
LABEL
Name
Member
OK
Cancel
19.5 ZyWALL/USG IPSec VPN Client Configuration
Provisioning
Use the Configuration > VPN > IPSec VPN > Configuration Provisioning screen to configure
who can retrieve VPN rule settings from the ZyWALL/USG using the ZyWALL/USG IPSec VPN Client.
In the ZyWALL/USG IPSec VPN Client, you just need to enter the IP address of the
get all the VPN rule settings automatically. You do not need to manually configure all rule settings in
the ZyWALL/USG IPSec VPN client.
VPN rules for the ZyWALL/USG IPSec VPN Client have certain restrictions. They must not contain
the following settings:
• AH active protocol
• NULL encryption
• SHA512 authentication
Chapter 19 IPSec VPN
DESCRIPTION
Enter the name of the concentrator. You may use 1-31 alphanumeric characters, underscores(
or dashes (-), but the first character cannot be a number. This value is case-sensitive.
Select the concentrator's IPSec VPN connection policies.
Note: You must disable policy enforcement in each member. See
IPSec VPN connection policies that do not belong to a VPN concentrator appear under Available.
Select any VPN connection policies that you want to add to the VPN concentrator and click the
right arrow button to add them.
The VPN concentrator's member VPN connections appear under Member. Select any VPN
connections that you want to remove from the VPN concentrator, and click the left arrow button
to remove them.
Click OK to save your changes in the ZyWALL/USG.
Click Cancel to exit this screen without saving.
ZyWALL/USG Series User's Guide
363
Section 19.2.1 on page 346.
ZyWALL/USG
),
_
to