Errors In Configuration Files Or Shell Scripts; Zywall / Usg Configuration File Details - ZyXEL Communications ZYWALL USG Series Reference Manual
Security firewalls
Hide thumbs
Also See for ZYWALL USG Series:
- Application notes (187 pages) ,
- Application note (184 pages) ,
- User manual (150 pages)
Table of Contents
Advertisement
Line 3 in the following example exits sub command mode.
interface ge1
ip address dhcp
!
Lines 1 and 3 in the following example are comments and line 4 exits sub command mode.
!
interface ge1
# this interface is a DHCP client
!
Lines 1 and 2 are comments. Line 5 exits sub command mode.
! this is from Joe
# on 2006/06/05
interface ge1
ip address dhcp
!
53.2.2 Errors in Configuration Files or Shell Scripts
When you apply a configuration file or run a shell script, the ZyWALL / USG processes the file line-
by-line. The ZyWALL / USG checks the first line and applies the line if no errors are detected. Then
it continues with the next line. If the ZyWALL / USG finds an error, it stops applying the
configuration file or shell script and generates a log.
You can change the way a configuration file or shell script is applied. Include
error off
configuration file or shell script and applies all of the valid commands. The ZyWALL / USG still
generates a log for any errors.
53.2.3 ZyWALL / USG Configuration File Details
You can store multiple configuration files on the ZyWALL / USG. You can also have the ZyWALL /
USG use a different configuration file without the ZyWALL / USG restarting.
• When you first receive the ZyWALL / USG, it uses the system-default.conf configuration file of
default settings.
• When you change the configuration, the ZyWALL / USG creates a startup-config.conf file of the
current configuration.
• The ZyWALL / USG checks the startup-config.conf file for errors when it restarts. If there is an
error in the startup-config.conf file, the ZyWALL / USG copies the startup-config.conf
configuration file to the startup-config-bad.conf configuration file and tries the existing
lastgood.conf configuration file.
ZyWALL / USG (ZLD) CLI Reference Guide
in the configuration file or shell script. The ZyWALL / USG ignores any errors in the
Chapter 53 File Manager
setenv stop-on-
341
Hide quick links:
Advertisement
Table of Contents
