The Configuration File Screen - ZyXEL Communications USG40 User Manual

Line 3 in the following example exits sub command mode.
interface ge1
ip address dhcp
!
Lines 1 and 3 in the following example are comments and line 4 exits sub command mode.
!
interface ge1
# this interface is a DHCP client
!
Lines 1 and 2 are comments. Line 5 exits sub command mode.
! this is from Joe
# on 2008/04/05
interface ge1
ip address dhcp
!
Errors in Configuration Files or Shell Scripts
When you apply a configuration file or run a shell script, the ZyWALL/USG processes the file line-by-
line. The ZyWALL/USG checks the first line and applies the line if no errors are detected. Then it
continues with the next line. If the ZyWALL/USG finds an error, it stops applying the configuration
file or shell script and generates a log.
You can change the way a configuration file or shell script is applied. Include setenv stop-on-
error off in the configuration file or shell script. The ZyWALL/USG ignores any errors in the
configuration file or shell script and applies all of the valid commands. The ZyWALL/USG still
generates a log for any errors.

35.2 The Configuration File Screen

Click Maintenance > File Manager > Configuration File to open the Configuration File
screen. Use the Configuration File screen to store, run, and name configuration files. You can also
download configuration files from the ZyWALL/USG to your computer and upload configuration files
from your computer to the ZyWALL/USG.
Once your ZyWALL/USG is configured and functioning properly, it is highly recommended that you
back up your configuration file before making further configuration changes. The backup
configuration file will be useful in case you need to return to your previous settings.
Chapter 35 File Manager
ZyWALL/USG Series User's Guide
671