The Service Group Summary Screen - ZyXEL Communications USG40 User Manual

The following table describes the labels in this screen.
Table 235 Configuration > Object > Service > Service > Edit
LABEL
Name
IP Protocol
Starting Port
Ending Port
ICMP Type
IP Protocol
Number
OK
Cancel

32.6.3 The Service Group Summary Screen

The Service Group summary screen provides a summary of all service groups. In addition, this
screen allows you to add, edit, and remove service groups.
To access this screen, log in to the Web Configurator, and click Configuration > Object > Service
> Service Group.
Figure 373 Configuration > Object > Service > Service Group
Chapter 32 Object
DESCRIPTION
Type the name used to refer to the service. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive.
Select the protocol the service uses. Choices are: TCP, UDP, ICMP, ICMPv6, and User
Defined.
This field appears if the IP Protocol is TCP or UDP. Specify the port number(s) used by
this service. If you fill in one of these fields, the service uses that port. If you fill in both
fields, the service uses the range of ports.
This field appears if the IP Protocol is ICMP or ICMPv6.
Select the ICMP message used by this service. This field displays the message text, not
the message number.
This field appears if the IP Protocol is User Defined.
Enter the number of the next-level protocol (IP protocol). Allowed values are 1 - 255.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
ZyWALL/USG Series User's Guide
560