The Application Patrol Profile Add/Edit Screen - ZyXEL Communications USG40 User Manual

Table 169 Configuration > UTM Profile > App Patrol > Profile
LABEL
Released Date
Update
Signatures

25.2.1 The Application Patrol Profile Add/Edit Screen

Use this screen to configure profile settings. Click Configuration > UTM Profile > App Patrol >
Profile, then click Add to create a new profile rule or click an existing profile and click Edit (or
double-click it) to open the following screen.
Figure 294 Configuration > UTM Profile > App Patrol > Profile > Add/Edit
The following table describes the labels in this screen.
Table 170 Configuration > UTM Profile > App Patrol > Profile > Add/Edit
LABEL
General Settings
Name
Description
Profile Management
Add
Chapter 25 Application Patrol
DESCRIPTION
This field displays the date and time the set was released.
Click this link to go to the screen you can use to download signatures from the update
server.
DESCRIPTION
Type the name of the profile. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive. These are valid, unique profile names:
• MyProfile
• mYProfile
• Mymy12_3-4
These are invalid profile names:
• 1mYProfile
• My Profile
• MyProfile?
• Whatalongprofilename123456789012
This displays the description of the App Patrol Profile.
Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
ZyWALL/USG Series User's Guide
425