Connecting Video Components - Denon DN-A7100 User Manual

CONNECTING VIDEO COMPONENTS

DVD player
COMPONENT
DIGITAL AUDIO VIDEO
S-VIDEO
OUT OUT OUT VIDEO OUT
OUT
Y C / P
B
L R
L R
L R L R R L
L R L R
S-VIDEO AUDIO AUDIO VIDEO
OUT IN OUT IN OUT IN
L R L R
VCR
VIDEO PROJECTOR
COMPONENT
S-VIDEO
VIDEO IN IN
Y C / P C / P
C / P B B R R
B R R
L
R
Video
S-VIDEO
Analog Audio
Digital Audio
(coaxial)
Digital Audio
(optical)
Satellite Tuner
AUDIO VIDEO S-VIDEO DIGITAL
OUT OUT OUT OUT
L R
L R
R L
R L
Video
S-VIDEO
L R
Analog Audio
VIDEO AUDIO S-VIDEO VIDEO
OUT OUT IN IN
Digital Audio
(coaxial)
L R
Digital Audio
(optical)
TV
VIDEO, S-VIDEO , COMPONENT JACKS
There are 3 types of video jacks on the rear panel.
VIDEO jack
The video signal for the VIDEO jacks is the
conventional composite video signal.
S-VIDEO jack
The video signal is separated into luminance (Y) and
color (C) signals for the S-VIDEO jack. The S-VIDEO
signals enables high-quality color reproduction. If
your video component has an S-VIDEO output, we
recommend to use it. Connect the S-VIDEO output
jack on your video component to the S-VIDEO input
jack on this unit.
Component jack
Make component video connections to a TV or
monitor with component inputs to produce higher
quality video images. Use a component video cable
or 3 video cords to connect the component video out
jacks on the DN-A7100 to the monitor.
Notes:
• Be sure to connect the left and right audio channels
properly.
Red connectors are for the R (right) channel, and
white connectors are the for L (left) channel.
• Be sure to connect the inputs and outputs of the
video signals properly.
• If you connect the S-VIDEO or component signal
to the S-VIDEO or component jack on this unit, it
is not necessary to connect the conventional video
signal to the VIDEO (composite) jack. If you use
both video inputs, this unit gives priority to the S-
VIDEO signal.
• Each type of video jack works independently.
Signals input to the VIDEO (composite) and S-
VIDEO jacks or component are output to the
corresponding VIDEO (composite) and S-VIDEO
or component jacks, respectively.
• This unit has the "TV-AUTO ON/OFF" function to
turn the TV ON or OFF automatically, by sensing
the incoming video signal from the VIDEO jacks.
• You may need to setup the digital audio output
format of your DVD player, or other digital source
components. Refer to the instructions of the each
component connected to the digital input jacks.
• There is no Dolby Digital RF input jack. Please use
an external RF demodulator with a Dolby Digital
decoder to connect a video disc player which has a
Dolby Digital RF output jack to the digital input jack
on this unit.
15