Siemens Nespresso TK911 Repair Instructions page 16

3.9.4 Energy-saving mode
The appliance switches automatically to energy-saving mode if it was
not used for 1 hour.
When energy-saving mode is active, the heater switches off, the cup
heater remains active.
Energy-saving mode
is displayed.
Energy-saving mode can be changed from
Energy-saving mode –
When the appliance is switched on again from energy-saving mode,
first wait for the heating up phase.
3.9.5 Cup heater
The cup heater is heated by an active PTC element.
The function of the cup heater can be changed from
Cup heater – off Cup
to
For a successful coffee preheat the cups on the cup heater:
The temperature of the cup heater may increase to 50 °C.
58300000116013_en_a – 21.08.06
on Energy-saving mode
to
heater– on.
3.9.6 Note
The functions
Start descaling cycle
Reset descaling alarm
are required for the descaling programme.
3.9.7 Rinsing
– off.
One of two settings can be selected:
Automatic
Manual
►
Check that all collecting pans have been inserted and press
the "Large cup" button; the appliance is rinsed.
3.9.8 Reset
Yes
If , all settings changed here in programming mode and the
modified amounts of liquid can be reset to the original factory setting.
and
Appliance automatically rinsed.
Each time the request is indicated by the
/
Rinsing? Press button
display text
Seite 16 von 61