Siemens Nespresso TK911 Repair Instructions page 30

Running the descaling programme
User action
12.
Amount of descaling mixture:
Amount of rinsing water:
Thermal block control while descaling solution is being conveyed:
Thermal block control during rinsing process:
If the appliance is switched off while the descaling programme is running:
►
irrespective of where the programme is, the programme automatically jumps to Point 8 when the appliance is switched on (to keep
descaling agent out of the appliance).
►
At the moment the appliance was switched off, the programme had completed step 6: descaling warning on the display is cancelled.
►
At the moment the appliance was switched off, the programme had not yet completed step 6: descaling warning on the display is
retained.
58300000116013_en_a – 21.08.06
Appliance response
Descaling programme ends
DISPLAY Ready
The descaling alarm is cancelled
0.6 litres (0.5 litres of water + 0.1 litres of descaling agent)
1.2 litres (full tank)
70 °C (Fluid temperature at thermal block outlet)
70 °C (Fluid temperature at thermal block outlet)
Seite 30 von 61