Displaying the Position Information
You can choose the way to display the position informa-
tion from three types; numerical, compass, and numeri-
cal with GPS status.
Notes:
You may change the unit of displayed measurements
via the SETUP mode.
You may set the time area and offset via the SETUP
mode.
The position information will be displayed with
the screen type you have selected last time before
switching the operation mode or turning off the ra-
dio.
Numerical display
1. Press the [ MENU ] key to display the MENU screen.
2. S e l e c t " G P S " o n t h e
screen by pressing the
[ ◄ ] or [ ► ] key, and
then press the [ ENT ]
key.
64
GPS Function (FTA-750 Only)
3. Select "GPS INFO" on
the screen by pressing
the [ ◄ ] or [ ► ] key, and
then press the [ ENT ]
key.
The latitude and lon-
gitude of your current
position, COG (course
o v e r g r o u n d ) , S O G
(speed over ground),
altitude, and the date
will be displayed below
the VOL meter on the
screen.
Note:
The power save operation of the GPS unit is disabled
while displaying the position information.
GPS
MARK POSITION
GPS INFO
COMPASS
GPS STATUS
BUSY
133.800
MR
FLG
MEM
KLAX-ATIS
VOL
LAT/LON
23 ° 56.890
N
123 ° 56.890
W
COG
SOG
ALT
KT
M
095 °
095
0956.8
DATE
Oct/25 09:56
AM