Displaying The Position Information - Yaesu FTA-750 Operating Manual

Displaying the Position Information

You can choose the way to display the position
information from three types; numerical, compass, and
numerical with GPS status.
Notes:
 You may change the unit of displayed measure-
ments via the SETUP mode.
 You may set the time area and offset via the SETUP
mode.
 The position information will be displayed with
the screen type you have selected last time before
switching the operation mode or turning off the ra-
dio.
Numerical display
1. Press the [ MENU ] key to display the MENU screen.
2. Select "GPS" on the
screen by pressing the
[ ◄ ] or [ ► ] key, and
then press the [ ENT ]
key.
FTA-750/FTA-550 O
gps F
unctIon
M
perATing AnuAl
(Fta-750 o )
nly
3. Select "GPS INFO" on
the screen by pressing
the [ ◄ ] or [ ► ] key, and
then press the [ ENT ]
key.
The latitude and lon-
gitude of your current
position, COG (course
o v e r g r o u n d ) , S O G
(speed over ground),
altitude, and the date
will be displayed below
the VOL meter on the
screen.
FCC ID: K6650013X20
IC: 511B-50013X20
GPS
MARK POSITION
GPS INFO
COMPASS
GPS STATUS
BUSY
133.800
MR
GRP
MEM
KLAX-ATIS
VOL
LAT/LON
23 ° 56.890
N
123 ° 56.890
W
COG SOG ALT
KT M
095 ° 095 0956.8
DATE Oct/25 09:56
AM
55
YAESU MUSEN CO., LTD.