Handling And Maintenance Of The Screen; On Dew Condensation; On Repacking; On Mounting On A Rack - Sony PVM-740 Operating Instructions Manual

To prevent any of the above issues, we recommend
reducing brightness slightly, and to turn off the power
whenever the unit is not in use.
Handling and Maintenance of the
Screen
The surface of the screen is specially coated to reduce
image reflection. Make sure to observe the following
points as improper maintenance procedures may impair
the screen's performance. In addition, the screen is
vulnerable to damage. Do not scratch or knock against it
using a hard object.
• Be sure to disconnect the AC power cord from the AC
outlet before performing maintenance.
• The surface of the screen is specially coated. Do not
attach adhesive objects, such as stickers, on it.
• The surface of the screen is specially coated. Do not
touch the screen directly.
• Wipe the screen surface gently with the supplied
cleaning cloth or a soft dry cloth to remove dirt.
• Stubborn stains may be removed with the supplied
cleaning cloth, or a soft cloth slightly dampened with
a mild detergent solution.
• The screen may become scratched if the cleaning cloth
is dusty.
• Never use strong solvents such as alcohol, benzene,
thinner, acidic or alkaline detergent, detergent with
abrasives, or chemical wipe as these may damage the
screen.
• Use a blower to remove dust from the screen surface.

On Dew Condensation

If the viewfinder is moved suddenly from a cold place to
a warm place, or used in a room with high humidity,
water droplets may form on the interior of the product.
This phenomenon is known as dew condensation.
This product does not come with a feature that warns
users of dew condensation. If water droplets are found
on the casing, turn off the power, and wait until the
condensation disappears before using.

On Repacking

Do not throw away the carton and packing materials.
They make an ideal container which to transport the
unit.

On Mounting on a Rack

Leave 1U space empty above and below the monitor to
ensure adequate air circulation or install a fan to
maintain the monitor's performance.
If you have any questions about this unit, contact your
authorized Sony dealer.

Disposal of the Unit

Do not dispose of the unit with general waste.
Do not include the monitor with household waste.
When you dispose of the monitor, you must obey the
law in the relative area or country.

On Fan Error

The fan for cooling the unit is built in. When the fan
stops and the 1 (standby) switch indicator on the front
panel flashes in green and amber for fan error indication,
turn off the power and contact an authorized Sony
dealer.

On AC Adaptor Terminal

The AC adaptor terminal of this unit (the connector for
AC adaptors) is a consumable part.
The unit may not operate properly if the pins of the AC
adaptor terminal are bent or deformed by shock or
vibrations, or if they become corroded due to prolonged
outdoor use.
Periodic inspections are recommended to keep the unit
working properly and to prolong its usable lifetime.
Contact your dealer or a Sony service representative for
more information about inspections.
41
Precaution