Bar Graph Presentation - JUMO LOGOSCREEN Operating Instructions Manual

3 Operator level (visualization)
Channel
step-on
Group
step-on

3.4 Bar graph presentation

26
This function activates the scaling display. Repeated activation steps through
the scaling for the channels within the group, and then blanks it out again.
Unlike "Group selection", where any group can be selected, this function
selects the groups one after another.
In this visualization mode, the analog inputs are presented both numerically
and in bar graph form. In addition to the analog channels, the digital inputs can
also be visualized at the bottom of the display.
If only digital channels are to be presented, then Chapter 3.7 "Binary
presentation" is recommended.
Programmable
alarm limits
An alarm (Alarm 1 or Alarm 2) is indicated by
an orange or red background. The colors
can be configured in the setup program.