JUMO LOGOSCREEN Operating Instructions Manual page 34

3 Operator level (visualization)
Start/stop
batch report
H
Activate batch
texts
34
Activate and display (if required) batch report for plant 3:
If the batch report is configured for start/stop via barcode reader, then it will
be started and stopped as follows.
Start batch
h Scan bar code for "Batch report for Plant 1 — 3".
h Start scan.
Stop batch
h Scan bar code for "Batch report for Plant 1 — 3".
h Stop scan.
If a batch report is stopped, then texts that have been activated by
a bar code will be reset to the standard (default) text in the batch
report that is currently active.
In the completed batch report, the texts will be saved.
If a line in a batch report is configured for bar code activation, the activation
proceeds as follows.
Activate text:
h Scan bar code for "Batch report for Plant 1 — 3".
Scan text.