Curve Presentation - JUMO LOGOSCREEN Operating Instructions Manual

3.3 Curve presentation

Group selection
Memory
presentation
Numerical
measurement
display
In the curve presentation, the individual signal traces run from top to bottom of
the display (vertical presentation).
Numerical measurement display
Memory presentation
An alarm (Alarm 1 or Alarm 2) is
indicated by an orange or red background. The colors
can be configured in the setup program.
You can use this function to directly select and display any one of the groups.
This function starts the presentation of the data that are available in the history
memory.
v Chapter 4 "Memory presentation (History)"
This function is used to switch the numerical measurement display or diagram
header on or off.
3 Operator level (visualization)
Group step-on
Channel step-on
Group selection
An alarm (Alarm 1 or Alarm 2) is
indicated by a red or orange color for the
curve. The colors can be
configured in the setup program.
Sampling rate
and operating
mode:
=
Normal
operation
=
Event
operation
=
Timed
operation
25