JUMO LOGOSCREEN Operating Instructions Manual page 48

6 Memory manager
Close memory
manager
Update
CF card
Backup ->
CF card
Config data ->
CF card
CF card ->
config data
Save all +
CF card
update
CF card ->
user list
48
Close the memory manager and reactivate the previous visualization.
Measurement data that have not yet been saved are written onto the CompactFlash
memory card.
All measurement data in the memory (also those which have already been fetched) are
written to the CompactFlash memory card.
The configuration data and the user list (fo password management) are written to the
CompactFlash memory card.
The configuration data are read in from the CompactFlash memory card. This will give
the recorder a new configuration.
All current reports will be concluded and written to the CompactFlash memory card,
together with the measurement data that have not yet been saved. The present
counter and integrator states will also be saved.
The user list is read in from the CompactFlash memory card.
Close memory manager
Update CF card
Back up -> CF card
Config data -> CF card
CF card -> config data
Save all +
update CF card
CF card -> user list