Insert Space; Delete Character; Move Cursor; Enter Text From Text List - JUMO LOGOSCREEN Operating Instructions Manual

Select
temperature
unit

8.1.2 Insert space

8.1.3 Delete character.

8.1.4 Move cursor.

8.1.5 Enter text from text list

8.1.6 Finish entry

h Select "°" and press the control knob.
All the temperature units that can be selected will now be shown. For better
legibility, the degree sign (°) and the unit (C or F) are separated, and must be
individually selected.
The selection and confirmation of the symbol is made by rotating and pressing
the control knob.
h Select the space button (
The space character will be inserted to the right of the cursor.
h Select the delete button (
The character to the left of the cursor will be deleted.
h Select the cursor positioning button (
knob.
The cursor can now be moved. The shifting is ended by operating the control
knob again.
All the texts that have already been entered (confirmed by OK) are stored in
the recorder in an internal text list. This function can be used to call up the list
and select a text for current application.
h Call text list (
The selection and confirmation of the required text are made by rotating and
pressing the control knob.
h Select the OK button (
Character entry will now be ended. The text that was entered is accepted, and
the dialog window is closed.
8 Entering text and values
) and press the control knob.
) and press the control knob.
).
) and press the control knob.
) and press the control
57