Table of Contents
Advertisement
Procedure
1
Lift the connector latches and pull the pull-tabs to disconnect the power-button
board cable and media-card reader cable from the connectors on the status-light
board.
2
Remove the screws that secure the status-light board to the palm-rest assembly.
1
screws (2)
3
status-light board
3
Lift the status-light board off the palmrest.
48
|
Removing the Status-Light Board
UPMIDIAS
4
2
power-button board cable
4
media-card reader cable
1
2
3
Advertisement
Table of Contents
