Replacing the Coin-Cell Battery
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
WARNING:
Replace the battery only with the same or equivalent type.
Discard used batteries according to the manufacturer's instructions
Procedure
1
Place the coin-cell battery into the slot and press gently to adhere it to the computer
base.
2
Route the coin-cell battery cable through the routing guides on the computer base.
3
Connect the coin-cell battery cable to its connector on the system board.
Postrequisites
1
Replace the fans cover. See "Replacing the Fans Cover" on page 30.
2
Replace the battery pack. See "Replacing the Battery Pack" on page 17.
3
Replace the base cover. See "Replacing the Base Cover" on page 15.
4
Follow the instructions in "After Working Inside Your Computer" on page 13.
38
|
Replacing the Coin-Cell Battery
Before working inside your computer, read the safety
The battery may explode if installed incorrectly.
UPMIDIAS