Dhcp Server - Atlantis Land A02-RAV260-W54 User Manual

VoIPMaster 260W
3.6.3.1.8 Port Setting
This section allows you to configure the settings for the router's Ethernet ports to solve some of
the compatibility problems that may be encountered while connecting to the Internet, as well
allowing users to tweak the performance of their network.
Port # Connection Type: Five options to choose from: Auto, 10M half-duplex, 10M fullduplex,
100M half-duplex or 100M full-duplex. Sometimes, there are Ethernet compatibility problems
with legacy Ethernet devices, and you can configure different types to solve compatibility issues.
The default is Auto, which users should keep unless there are specific problems with PCs not
being able to access your LAN.
IPv4 TOS priority Control (Advanced users): TOS, Type of Services, is the 2nd octet of an IP
packet. Bits 6-7 of this octet are reserved and bit 0-2 are used to specify the priority
(precedence) of the packet, and bits 3-5 are specified the delay, throughput and reliability.
This feature uses bits 0-2 to classify the packet's priority. If the packet is high priority, it will flow
first. Therefore, when this feature is enabled, the router's Ethernet switch will check the 2nd
octet of each IP packet. If the value in the Precedence of TOS field matches the checked values
in the table (0 to 63), this packet will be treated as high priority.

3.6.3.1.9 DHCP Server

You can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or enable
the router's DHCP relay functions. The DHCP protocol allows your router to dynamically assign
IP addresses to PCs on your network if they are configured to obtain IP addresses
automatically.
41