Atlantis Land A02-RAV260-W54 User Manual page 45

• WPA Shared Key: The key for network authentication. The input format is in character
style and key size should be in the range between 8 and 63 characters.
• Group Key Renewal: The period of renewal time for changing the security key
automatically between wireless client and Access Point (AP).
WEP:
• WEP Encryption: To prevent unauthorized wireless stations from accessing data
transmitted over the network, the router offers highly secure data encryption, known as
WEP. If you require high security for transmissions, there are two alternatives to select
from: WEP 64 and WEP 128. WEP 128 will offer increased security over WEP 64.
• WEP Authentication: There are three options to choose, Open System, Shared Key
and Both. The default is set to Open System which does not request a shared key
between the AP sender and the AP client, only supplying a correct SSID and an
encryption key if there is any. With Share Key authentication, the AP client is granted
only if it provided correct challenge response to the AP.
• Passphrase: This is used to generate WEP keys automatically based upon the input
string and a pre-defined algorithm in WEP64 or WEP128. You can input the same string
in both the AP and Client card settings to generate the same WEP keys. Please note that
you do not have to enter Key (1-4) as below when the Passphrase is enabled.
• Default Used WEP Key: Select the encryption key ID; please refer to Key (0-3) below.
• Key (1-4): Enter the key to encrypt wireless data. To allow encrypted data transmission,
the WEP Encryption Key values on all wireless stations must be the same as the router.
There are four keys for your selection. The input format is in HEX style, 5 and 13 HEX
codes are required for WEP64 and WEP128 respectively, the separator is "-". For
example, using WEP64, 11-22-33-44-55 is a valid key, whilst 1122334455 is invalid.
VoIPMaster 260W
39