Atlantis Land A02-RAV260-W54 User Manual page 54

• Obtain an IP address automatically via DHCP client to enable the DHCP client
function or click Specify an IP address to disable the DHCP client function, and specify
the IP address manually. The setting of this item is specified by your ISP.
• RIP: RIP v1, RIP v2, RIP v1+v2 and RIP v2 Multicast.
• MTU: Maximum Transmission Unit. The size of the largest datagram (excluding
mediaspecific headers) that IP will attempt to send through the interface.
• TCP MSS Clamp: It is enabled by default. All TCP traffic routed through the interface
will be examined. If a TCP SYN (synchronize/start) segment is sent with a maximum
segment size larger than the interface MTU (Maximum Transmission Unit), the MSS
option will be rewritten in order to allow TCP traffic to pass through the interface without
requiring fragmentation
BRIDGE (PPPoE)
• Description: A user-definable name for this connection.
• VPI/VCI: Enter the information provided by your ISP.
• ATM Class: The Quality of Service for ATM layer.
•
Encapsulation method: Select the encapsulation format, this is provided by your ISP.
• Acceptable Frame Type: Specify what kind of traffic can through this connection, all
traffic or only VLAN tagged.
• Filter Type: Specify the type of ethernet filtering performed by the named bridge
interface.
All
Ip
Pppoe
• PVID for Untagged Frames: PVID is known as Port VLAN Identifier. When an untagged
packet is received by input port(s), this packet will be tagged with specified PVID. The
valid value range for PVID is 1~4094.
Allows all types of ethernet packets through the port.
Allows only IP/ARP types of ethernet packets through the port.
Allows only PPPoE types of ethernet packets through the port.
VoIPMaster 260W
48