Cabling - Atlantis Land A02-RAV260-W54 User Manual

POWER Switch
The Ethernet Port # 4 (close the Phone Port) can be connected to the
computer and console. You need a special console tool which is included
in this package to connect the LAN cable of Port 4 when connecting to a
PC's RS-232 port (9-pin serial port).

2.4 Cabling

The most common problem is bad cabling or ADSL line. Make sure that all connected
devices are turned on. On the front of the product is a bank of LEDs. As a first check, verify
that the LAN Link, ADSL , PWR and SYS LEDs are lit. If they are not, verify that you are
using the proper cables.
If the LED ADSL continually flashes You have to read Note (into section 3.6.3.2.3) in order to
solve this problem
Ensure that all other devices connected to the same telephone line as your router (e.g.
telephones, fax machines, analog modems) have a line filter (A01-AF2) connected between
them and the wall socket (unless you are using a Central Splitter or Central Filter installed by
a qualified and licensed electrician), and ensure that all line filters are correctly installed and
the right way around.
Missing line filters or line filters installed the wrong way around can
cause problems with your ADSL connection, including frequent
disconnections.
jack.
A Power ON/OFF switch
VoIPMaster 260W
9