Atlantis Land A02-RAV260-W54 User Manual page 87

Special dial codes
The following table lists the special dial codes that are built-in to the system:
Option
Flash-hook
(Wireless Router with
LINE port only)
*69
##
*20
*80
*74<x><number>#
*90<phone-number>
Description
Switch to PSTN line
Note: A quick press of the hook. On some phones a button
is provided which provides Flash-hook functionality. The
button is marked "FLASH" or "RECALL".
Return the last missed call for SIP service only
Note: Entering this on a phone will call the last number
which made a call to the phone. For example A makes a call
to B, but hangs up before B answers. If B enters *69, A will
be called.
Last number redial
Set do not disturb on
Note: It is possible to set a Do-Not-Disturb feature on a
phone such that any phone which calls the phone will
receive an engaged tone and the phone called will not ring.
For example, B enters *20 and hangs up. A makes a call to
B, and receives the engaged tone and phone B does not
ring.
Set do not disturb off
Set the number for Speed dial code 'x', where 'x' is a
number between 2 and 9.
Note: Where <x> is a number between 2 and 9, and
<number> is the number to dial. The code needed to dial a
speeddial from a phone connected to a VoIP Router is:
<x>#, where <x> is a number between 2 and 9.
The settings will infect to your setting in Speed Dial on WEB
GUI.
Set the number for performing Blind Call Transfer, where
<phone-number> is the number that you wish to transfer the
call to. It's for SIP service only.
Note: In Blind Call Transfer, you have a call in progress
(incoming or outgoing) and decide you wish to transfer the
call to another phone. To transfer the call, perform the
following steps:
1. Hook-flash to get a dial tone.
VoIPMaster 260W
81