Ethernet; Ethernet Client Filter - Atlantis Land A02-RAV260-W54 User Manual

3.6.3.1.2 Ethernet

The default IP address for the router is 192.168.1.254.
RIP: RIP v1, RIP v2, RIP v1+v2 and RIP v2 Multicast.
The Subnet mask of the Secondary IP Address depends on the setting of
the Primary IP Address.
3.6.3.1.3 IP Alias
IP Address: Insert the secondary IP Address
SubNetMask: Set the related SubNetMask
Security Interface: Assign the interface type to the secondary Ip Address
• Internal: The network is behind NAT. All traffic will do network address translation when
s e n d i n g
• External: There is no NAT on this IP interface and connected to the Internet directly.
Mostly it will be used when providing multiple public IP addresses by ISP. In this case,
you can use public IP address in local network which gateway IP address point to the IP
a d d r
• DMZ: Specify this network to DMZ area. There is no NAT on this interface.

3.6.3.1.4 Ethernet Client Filter

The Ethernet Client Filter supports up to 16 Ethernet network machines that helps you to
manage your network control to accept traffic from specific authorized machines or can restrict
unwanted machine(s) to access your LAN.
There are no pre-define Ethernet MAC address filter rules; you can add the filter rules to meet
your requirements.
o u t t o I n t e r n e t
e s s o n
i f N A T
t h i s i
VoIPMaster 260W
i s e n a b l e d .
n t e r f a c e .
34